Mossgate Ruins
Weathered limestone ruins of a forgotten order of wayglass keepers, reclaimed by moss, roots and ivy. One grid-snapped kit builds overgrown courtyards, sunken stairwells and small treasure vaults.
Rendered in Unity
Every image is a real-time render from Unity 6 with URP, taken in the included example scenes. Click any image to enlarge it.
Snaps to a 2 m grid
- Walls are 2 m long and 3 m tall; floors, platforms and stairs fill one 2 × 2 m cell.
- Pillars sit on grid corners and cap every corner, T and X junction.
- Height steps are 1 m: platforms stack, and one stair piece climbs exactly one platform.
- The door and the ivy and sconce overlays reuse the wall's transform — just copy it.
We checked every pair of touching pieces in the example scenes — 2,301 pairs, placed at 0°, 90°, 180° and 270° — and found 0 visible overlapping faces.
Pull the lever, open the vault
Three movers share one small script with eased, interruptible motion — no Animator needed. Pull the lever and the door opens: the example scenes wire them together with UnityEvents.

Door
Swings 95° to one side · collider turns with the leaf

Treasure chest
Lid opens 105° · gold inside

Floor lever
±32° throw · onOpened / onClosed events
Built to be easy to use
One material for everything
Every prefab shares a single 1024×512 atlas and one URP material, plus a matching emission map.
Glowing wayglass
Turquoise crystals on keystones, braziers and sconces glow through the emission map, with softly pulsing point lights.
Above and below ground
Walls, pillars, stairs, platforms and ceiling slabs build both open ruins and underground vaults.
Real-world scale
Metric scale on the same grid as Emberpine Camp, so both packs sit together naturally.
Colliders & static flags
Doorways and the gate keep their openings walkable. Small scatter stays collider-free and out of the lightmap.
Four example scenes
A catalog of every prefab, a forest ruin, a sunken vault and a small mechanisms demo.
33 models, measured in Unity
Sizes are width × height × depth in metres, measured on the prefabs in Unity.
| Model | Size (m) | Triangles | Collider |
|---|---|---|---|
| Structure 15 models | |||
| FloorMossy flagstone tile, top at y = 0 | 2.00 × 0.25 × 2.00 | 10 | Box |
| Floor — BrokenLifted and missing stones | 2.00 × 0.38 × 2.00 | 125 | Box |
| Ground — GrassGrass tile, top at y = 0 | 2.00 × 0.25 × 2.00 | 10 | Box |
| Platform1 m terrace block, stackable | 2.00 × 1.00 × 2.00 | 10 | Box |
| Stairs4 steps, 1 m rise | 2.00 × 1.06 × 2.00 | 64 | Ramp box |
| CeilingVault ceiling / crypt roof slab | 2.00 × 0.50 × 2.00 | 12 | Box |
| Ceiling — BrokenHole with hanging roots | 2.00 × 1.50 × 2.00 | 113 | Mesh |
| WallFull 3 m wall | 2.00 × 3.06 × 0.69 | 84 | Box |
| Wall — Low1 m parapet / railing | 2.00 × 1.06 × 0.69 | 54 | Box |
| Wall — BrokenCollapsed wall, 3 m → 0.8 m | 2.00 × 3.11 × 1.71 | 188 | Mesh |
| Wall — DoorwayArched doorway, opening stays free | 2.00 × 3.06 × 0.75 | 224 | 3 boxes |
| Wall — WindowBarred arched window | 2.00 × 3.06 × 0.63 | 166 | Box |
| PillarCorner / junction pillar | 0.97 × 3.31 × 0.97 | 52 | Box |
| Pillar — BrokenStump with a fallen drum | 1.49 × 1.63 × 1.45 | 70 | Mesh |
| Arch Gate4 m gate with a wayglass keystone | 4.00 × 4.31 × 1.09 | 312 | 3 boxes |
| Ruin 3 models | |||
| Rubble PileTumbled blocks | 1.61 × 0.89 × 1.43 | 126 | Mesh |
| Fallen ColumnToppled round column | 3.45 × 1.00 × 1.45 | 146 | Mesh |
| Stone DebrisGround scatter | 1.17 × 0.19 × 1.06 | 70 | — |
| Nature 6 models | |||
| Ivy DrapeWall overlay, same pivot as the wall | 0.69 × 2.22 × 0.88 | 209 | — |
| Root TangleRoots across the ground | 2.78 × 0.49 × 2.10 | 213 | — |
| Ruin TreeOld tree with buttress roots | 3.00 × 3.71 × 2.41 | 336 | Capsule (trunk) |
| ShrubFlowering shrub | 1.31 × 0.59 × 1.20 | 100 | — |
| Grass TuftGround scatter | 0.49 × 0.45 × 0.43 | 94 | — |
| Wild FlowersTulips, violet spikes and daisies | 0.76 × 0.75 × 0.67 | 370 | — |
| Decor 6 models | |||
| Wayglass BrazierGlowing crystals + point light | 1.00 × 1.94 × 1.00 | 124 | Box |
| Wall SconceWall crystal + point light (overlay) | 0.43 × 0.78 × 0.50 | 68 | — |
| Keeper StatueHooded keeper holding a wayglass orb | 1.25 × 2.73 × 1.25 | 237 | Box |
| Seal AltarAltar with a wayglass seal | 1.38 × 1.19 × 1.00 | 78 | Box |
| Urn ClusterClay urns, one toppled | 1.47 × 0.88 × 1.26 | 144 | Box |
| Gold PileCoins, bars, goblet and gems | 1.76 × 0.56 × 1.24 | 127 | — |
| Movers 3 models | |||
| DoorArched plank door, uses the doorway's transform | 1.15 × 2.21 × 0.34 | 152 | Box (leaf) |
| Treasure ChestOpening lid, gold inside | 1.19 × 0.91 × 0.88 | 188 | Box (body + lid) |
| LeverFloor lever with events | 0.75 × 1.44 × 0.75 | 84 | Box (socket) |
Specs & compatibility
Geometry
- 10–370 triangles per model; 4,360 for one of each
- 2 m grid, 1 m height steps, documented pivots
- Editable Blockbench source included
- No LODs — every model is well under 1,000 triangles
Textures & material
- Albedo atlas 1024×512, 16 texels per metre
- Separate emission map for the wayglass
- Point filtering for crisp pixels
- One shared URP Lit material, GPU instancing on
Scripts & scenes
MossgateHinge—Open(),Close(),Toggle()and UnityEvents- Forest Ruin: 268 renderers, 16,045 triangles, 1 material, 3 point lights
- Sunken Vault: 275 renderers, 9,592 triangles, 1 material, 4 point lights
- Catalog and Mechanisms scenes
Tested with
- Unity 6 (6000.4.3f1) with URP 17.4
- Unity 2022.3.62f3 LTS with URP 14.0.12
- Clean-project import in both: no missing prefabs, scripts, materials or shaders
- Play Mode tests pass in both (7/7)
Good to know
- Only URP has been tested. Built-in RP and HDRP need the material shader swapped.
- Ceilings are separate prefabs; there is no automatic wall or ceiling hiding for top-down cameras.
- Example scenes use real-time lights; no lightmaps are baked.
- Frame rate and mobile platforms have not been measured yet.
Up and running in three steps
- Import the package into a Unity project that uses URP.
- Open
MG_Catalog,MG_Demo_ForestRuin,MG_Demo_SunkenVaultorMG_Demo_Mechanisms. - Turn on 1 m move snapping and drag prefabs from
Prefabs/— they all shareMG_Atlas_Lit.
Changelog
- v1.1October 2026Rebuilt the ruin tree as one continuous trunk with buttress roots. Removed the hanging roots from the arch gate. Shrub blossoms now sit in the leaves. New Wild Flowers model; the grass tuft is now grass only.
- v1.0October 2026First version: 32 models, 32 prefabs, three movers and four scenes.
Questions
Which render pipeline does it support?
The pack is built and tested for URP on Unity 6 and Unity 2022.3 LTS. The models and textures work anywhere, but on Built-in RP or HDRP you will need to switch the shared material to that pipeline's lit shader.
Can I mix it with Emberpine Camp?
Yes. Both packs use the same metric scale and texel density, and Mossgate's mossy limestone and turquoise glow are designed to sit next to Emberpine's warm forest camp.
How do I connect the lever to the door?
In the lever's MossgateHinge, add the door to the onOpened and onClosed events and pick Open and Close. The Mechanisms and Sunken Vault scenes show the setup.
Can I recolour or edit the models?
Yes. The pack ships with the editable Blockbench source, FBX models and the atlas and emission textures as PNG files.
Does it work with a top-down camera?
Yes. Ceilings are separate prefabs, so you can group them and switch them off, as the Ceilings parent in the Sunken Vault scene does.
